My Site

Unclog X1 P1

When these unload they cut the filament above the hot end. It is normal for filament to be left in the nozzle. Normally the filament in the nozzle melts and new filament pughes it out.

If, for some reason, you want to get the filament out of a hot end get an allen key that will fit in the little hole, 1.5mm should work. I think ball end is better, but any should work. Heat the end with a lighter or torch, Be careful not to burn yourself you probably have to hold the allen key with something other than your hand. Press the heated key into the plastic. Let the plastic cool and harden. Pull.