My Site

Missing Stuff

In the original post stuff that can help figure out what the problem is was not specified. This happens fairly often and I have lumped them on this page. Find what your question is about and see what information is missing.

Adhesion

Stuff needs to stick to the bed. The adhesion is between the plastic you are printing and the bed you are printing on. You need to tell us what plastic, i.e. PLA, you are printing and the bed, i.e. PEI, you are printing on.

Red Overture is not a plastic type, PLA is.

The normal bed for printer X is not a bed material. Do you want me to look up printer X and figure out what bed it comes with? If you do not care to put the effort in to describe the problem, I certainly do not want to put the effort in to solve the problem.

General

There are a bunch of things that will help those who are trying to help you. Some of these may not be helpful for your question. You may have specified some in your question. They all can, sometimes, be helpful. If I sent you to this page you are missing one of them.

Printer

We have no idea what printer you are using. “My printer” is not a brand we recognize. Sometimes we can give help for a specific printer or the type of printer affects how things work.

Creality Ender 3 is it’s own thing.

Plastic

What plastic, PLA, ASA, etc. you are using makes a difference. Again, “Red Overture” is not a plastic, PLA is.

Build Plate

What you are printing on makes a difference. Modern plates often have a coating of PEI. Your plate is not spring steel. It is spring steel with a coating of some sort on it. we need to know what the coating is.